Thema: Videoüberwachungssoftware

[SiLæncer]

Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Added the long-awaited ability to view the program logs directly from the interface. Open the dialog with logs through Xeoma’s Main Menu Information Event Log, and the administrator and system operators will be able to view which modules were triggered and other important events.
    Formerly added as an Additional feature “Fire Detection” is now available as part of the “Smoke Detector” module in Xeoma Pro mode with any Xeoma Pro license, not as an Additional module.
    Starter: Full-screen mode is now available in Xeoma Starter.
    Xeoma’s ‘Active licenses’ dialog (Main Menu -> Information -> Active Licenses) now features information not only about activated licenses, but also about renewals.
    Multi-Server Mode: now Xeoma has the ability to save previously configured Tabs in Multi-Server Mode when adding new servers or deleting old ones. It will also help to avoid tabs breaking when one or several of servers is/are unavailable.
    Now the program can be opened in full screen with the F11 key on the keyboard. This feature will work on Windows, Linux and even Mac OS X.
    Added the ability to set the port for webRTC (previously the ports had been assigned automatically);
    Fixed excessive deletion of records during overwriting when storage time is set to 1 day.
    Fixed client launch on Linux with new glu 9.0.2-1.
    Xeoma Pro Your Cloud: fixed the issue with new parameters from the main cloud.config not applying.
    Fixed the issue on ArchLinux that the embedded links to web pages (purchase page, etc.) did not open.
    Fixed sending a POST request with the %EMOTIONS% macro from the “HTTP Request Sender” module.
    Fixed incorrect time on the archive export page in Xeoma web interface.
    Eliminated appearance of gray frames when adding an H265 camera to the program.
    Fixed the issue where the resolution of the video stream received via a direct link from the “Web Server” module depended on whether someone was viewing the camera on the web page at that moment or not.
    Fixed appearance of gray frames in the built-in archive viewer when viewing recordings from an H265 camera.
    Fixed the issue that the RPI camera module did not work in Xeoma on the Raspberry micro PC.
    Fixed the delay in pausing playback in the archive viewer after the pause button has been pressed.

[close]

http://felenasoft.com/

[SiLæncer]

Whats new:>>

Fixed the issue where all cameras were shown in background behind the new camera setup dialog when adding a new camera from the Single Camera View window.

http://felenasoft.com/

[SiLæncer]

ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Introduced profiles to configure up to 4 commands per camera
    Added magnetic/snapping borders to the camera windows
    Updated internal web server to Apache 2.4.48 and PHP 8.0.7 (Apache and PHP both with OpenSSL 1.1.1k)
    Because many users expressed security concerns we removed all "Show password" checkboxes
    Dropped Windows Vista and Windows Server 2008 support

[close]

http://www.contaware.com/

[SiLæncer]

Changelog

    Added the long-awaited ability to view the program logs directly from the interface. Open the dialog with logs through Xeoma’s Main Menu – Information – Event Log, and the administrator and system operators will be able to view which modules were triggered and other important events.
    Formerly added as an Additional feature “Fire Detection” is now available as part of the “Smoke Detector” module in Xeoma Pro mode with any Xeoma Pro license, not as an Additional module.
    Starter: Full-screen mode is now available in Xeoma Starter.
    Xeoma’s ‘Active licenses’ dialog (Main Menu -> Information -> Active Licenses) now features information not only about activated licenses, but also about renewals.
    Multi-Server Mode: now Xeoma has the ability to save previously configured Tabs in Multi-Server Mode when adding new servers or deleting old ones. It will also help to avoid tabs breaking when one or several of servers is/are unavailable.
    Now the program can be opened in full screen with the F11 key on the keyboard. This feature will work on Windows and Linux.
    Added the ability to set the port for webRTC (previously the ports had been assigned automatically);
    Fixed excessive deletion of records during overwriting when storage time is set to 1 day.
    Fixed client launch on Linux with new glu 9.0.2-1.
    Xeoma Pro Your Cloud: fixed the issue with new parameters from the main cloud.config not applying.
    Fixed the issue on ArchLinux that the embedded links to web pages (purchase page, etc.) did not open.
    Fixed sending a POST request with the %EMOTIONS% macro from the “HTTP Request Sender” module.
    Fixed incorrect time on the archive export page in Xeoma web interface.
    Eliminated appearance of gray frames when adding an H265 camera to the program.
    Fixed the issue where the resolution of the video stream received via a direct link from the “Web Server” module depended on whether someone was viewing the camera on the web page at that moment or not.
    Fixed appearance of gray frames in the built-in archive viewer when viewing recordings from an H265 camera.
    Fixed the issue that the RPI camera module did not work in Xeoma on the Raspberry micro PC.
    Fixed the delay in pausing playback in the archive viewer after the pause button has been pressed.
    Fixed the issue where all cameras were shown in background behind the new camera setup dialog when adding a new camera from the Single Camera View window.

[close]

http://felenasoft.com/

[SiLæncer]

Changelog

    Additional module “Object Recognition“: the module now supports work in 64-bit Linux/ARM systems and can be used for example in micro computers like Raspberry Pi. The same set of supported objects to recognize, same purchase conditions and simplicity of configuration now available for single board computers as well! More about the module
    Xeoma Pro: added the new “Thermal Camera Data” module for integration with HikVision thermal cameras. This module receives information about temperature from HikVision thermal cameras and can trigger when the minimum, maximum or average temperature is equal to, higher, lower than the defined value, or is in the specified range. The module can be used to detect passengers with fever, or catch ignition of a fire, or to control technology temperatures in production.
    Do you need this function for another camera brand? Contact us!
    Xeoma Pro: improved the timeline operation for the “simultaneous view of several archives” mode. Now, to quick jump to a specific data and time you can click on the corresponding place in any of the colored lines on a timeline.
    Layouts: improved the “unassigned cameras” Page. Now the “unassigned cameras” Page changes dynamically: cameras that have been assigned are removed from this Page, and new unassigned cameras are automatically added to this Page.
    Archive recordings viewer: quick pause and start of playback is once again available upon clicking on any place in camera image.
    The Connection Dialog now has the auto filling option for the list of servers. Just start typing the server address, and the servers in the list will be sorted out, showing only those corresponding to what you typed. This improvement will be most useful for systems that handle connection to dozens of Xeoma servers.
    Web Server: a search bar added to a Xeoma page with the list of cameras that can be used for a quick search for an added camera by its name.
    Layouts: a new Pages mode added. When it is used, all connected clients will automatically be switched to a Page that displays triggered (‘active’) cameras. This mode will be perfect for a strict protocol systems where operators are obliged to view alerts and triggered cameras.
    Notifications sent with the Mobile notifications module now will also work in Xeoma’s Trial mode. That means that like almost 100 features of Xeoma, this feature can now be tested without having to purchase a Xeoma license.
    Added automated activation of communication through ONVIF protocol for HikVision cameras during a scan for cameras. Before this change HikVision cameras sometimes failed to be added to Xeoma (even manually) because of ONVIF communication disabled in the settings. Now if you enter authorization credentials in Xeoma’s search boxes, the program can enable ONVIF for you so that the camera is successfully added.
    Multi-server mode: improved usability of Pages in the multi-server mode. Now Xeoma remembers what Page has been the last to close, and re-opens it at the next launch.
    Screenshot: enhanced usability for sending a still shot from a camera to email with the embedded “Screenshot” feature. Now you do not need to enter the authorization data in Xeoma if you use a ‘local’ email server with no credentials.
    Camera-Embedded Detector: fixed a possible authorization issue with the HiWatch DS-I450 camera model.
    Xeoma Pro Your Cloud: improved work of the “HTTP Receiver” module in combination with “HTTP Sending to another Xeoma” in the Xeoma Pro Your Cloud mode. Fixed the issue when you could get the ‘Waiting for image from camera’ message instead of the camera stream.
    Web Server: fixed the PTZ camera issue when the camera didn’t stop rotation even though the PTZ controller button was no longer pressed.
    Fixed the possible rights issue in Mac OSX that could have resulted in activation, recording and settings saving issues.
    Fixed Xeoma server freezes at group change of ‘Universal Camera‘ module settings for a big amount of cameras.

[close]

http://felenasoft.com/