Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

PortExpert provides you with a detailed view of your PCs cybersecurity. It automatically monitors all applications connected to the internet and gives you all the information you might need to identify potential threats to your system.

License: Freeware

Whats new:>>

[Refactoring] Make portable version truly portable (Kyle_Katarn)
[Refactoring] Code signing certificate renewal (Kyle_Katarn)

http://www.kcsoftwares.com/?portexpert

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

Thread pool applied on UDP client connection.
Global.BLACKLIST_TYPE_NONE has been removed.
Request.isUnsupportedProtocol flag has been removed.
Jahaslist has been updated to 2352337.
Bind on listenIP for DnsListener, HxListener, WebSocketHandler.
Clean up additional section for relay signal.
Listner for DNS over SSL enabled.
Add one more NxError for NxRelay client IP.

[close]

http://www.nxfilter.org/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

bridge - improved packets processing when bridge port changes states;
crs3xx - fixed bonding slave failover when packets are sent out of the bridge interface;
crs3xx - fixed LACP member failover;
crs3xx - improved link state detection when one side has disabled interface;
defconf - fixed bridge default configuration for SOHO devices with more than 9 Ethernet interfaces;
package - free up used storage space consumed by old RouterOS upgrades;
snmp - fixed w60g "phy-rate" readings;
supout - added "ip-cloud" section to supout file;
w60g - fixed random disconnects;
w60g - general stability and performance improvements;
winbox - added 64,8 GHz frequency to w60g interface frequency settings;
winbox - show "sector-writes" on devices that have such counters;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Advanced Port Scanner is a small, very fast, robust and easy-to-use Port Scanner. Powered with multithread scan technology, Advanced Port Scanner can scan hundreds of ports in just a few seconds! Also, it contains descriptions for common ports, and can perform scans on predefined port ranges.

Freeware

http://www.advanced-port-scanner.com/de/

[SiLæncer]

PingInfoView is a small utility that allows you to easily ping multiple host names and IP addresses, and watch the result in one table. It automatically ping to all hosts every number of seconds that you specify, and displays the number of succeed and failed pings, as well as the average ping time. You can also save the ping result into text/html/xml file, or copy it to the clipboard.

License: Freeware

Whats new:>>

Added new option: Beep On Succeeded Pings (After Failure).
Fixed bug: When the lower pane option was turned off, PingInfoView didn't add the pings to the log file.

http://www.nirsoft.net/utils/multiple_ping_tool.html

[SiLæncer]

Whats new:>>

Compatibility for Windows 10 version 1803
Fix: Exception errors with new TCP/UDP-Connections feature on some systems
Fix: High-DPI adjustments for TCP/UDP-Connections toolbar and icons
Minor bug fixes and improvements

www.netsetman.com/index.php?s=nsm

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Changelog

Fixed: LAN-810 When changing the global email signature under Configuration\E-mail Settings and subsequently importing emails as tickets into the help desk, attached images and files are missing from the tickets

[close]

http://www.lansweeper.com/

[SiLæncer]

Changelog

- Request.parseHttpsQuery works with the local bind IP other than '127.0.0.1'.
- Add a dot to a domain name on DnsListener if there's no tailing dot.
- When there's no associated user, relay signals and EDNS queries will be blocked
  instead of Login Redirection.
- DnsListener, HxListener will use Config.listenIP and Config.dnsPort.
- Initialize Request.realUname to an empty string rather than null.

[close]

http://www.nxfilter.org/

[SiLæncer]

Changelog

Bridge - improved bridge port state changing process;
Crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
Crs3xx - added command that forces fan detection on fan-equipped devices;
Crs3xx - fixed port disable on CRS326 and CRS328 devices;
Crs3xx - fixed tagged packet forwarding without VLAN filtering (introduced in 6.42.6);
Crs3xx - fixed VLAN filtering when there is no tagged interface specified;
Dhcpv4-relay - fixed false invalid flag presence;
Dhcpv6-client - allow to set "default-route-distance";
Dhcpv6 - improved reliability on IPv6 DHCP services;
Dhcpv6-server - properly update interface for dynamic DHCPv6 servers;
Ethernet - improved large packet handling on ARM devices with wireless;
Ethernet - removed obsolete slave flag from "/interface vlan" menu;
Ipsec - fixed "sa-src-address" deduction from "src-address" in tunnel mode;
Ipsec - improved invalid policy handling when a valid policy is uninstalled;
Ldp - properly load LDP configuration;
Led - fixed default LED configuration for RBLHGG-5acD-XL devices;
Lte - added signal readings under "/interface lte scan" for 3G and GSM modes;
Lte - fixed memory leak on USB disconnect;
Lte - fixed SMS send feature when not in LTE network;
Package - do not allow to install out of bundle package if it already exists within bundle;
Ppp - fixed interface enabling after a while if none of them where active;
Sfp - hide "sfp-wavelength" parameter for RJ45 transceivers;
Upgrade - fixed RouterOS upgrade process from RouterOS v5;
Userman - fixed compatibility with PayPal TLS 1.2;
Vrrp - fixed VRRP packet processing on VirtualBox and VMWare hypervisors;
W60g - added distance measurement feature;
W60g - fixed random disconnects;
W60g - general stability and performance improvements;
W60g - improved MCS rate detection process;
W60g - improved MTU change handling;
W60g - properly close connection with station on disconnect;
W60g - stop doing distance measurements after first successful measurement;
Winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
Winbox - fixed "sfp-connector-type" value presence under "Interface/Ethernet";
Winbox - fixed warning presence for "IP/IPsec/Peers" menu;
Winbox - properly display all flags for bridge host entries;
Winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
Wireless - added option to disable PMKID for WPA2;
Wireless - fixed memory leak when performing wireless scan on ARM;
Wireless - fixed packet processing after removing wireless interface from CAP settings;
Wireless - updated "united-states" regulatory domain information;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

A lightweight network monitoring utility that detects the connections made by software installed on your computer and displays them in an easy to read format.

Freeware

http://www.wdpsoftware.com/wdpsPNetMon/index.html

[SiLæncer]

SmartSniff is a network analysis/dignostic tool that allows you to capture TCP/IP packets that pass through your network adapter. You can view the captured data as sequence of conversations between clients and servers in ASCII mode (for text-based protocols, like HTTP, SMTP, POP3 and FTP) or as hex dump (for non text-based protocols, like DNS).

On Win2K or above, SmartSniff is able to capture TCP/IP packets using raw sockets. This method has some limitations and problems, but it does not require any additional installation. A better way to capture TCP/IP packets is to install the open-source WinPcap capture driver, functional on Windows 98 and later.

License: Freeware

What's new: >>

Fixed bug from version 2.28: SmartSniff crashed when selecting loopback interface or other network interfaces without connection information.

http://www.nirsoft.net/utils/smsniff.html

[SiLæncer]

DNSQuerySniffer is a network sniffer utility that shows the DNS queries sent on your system. For every DNS query, the following information is displayed: Host Name, Port Number, Query ID, Request Type (A, AAAA, NS, MX, and so on), Request Time, Response Time, Duration, Response Code, Number of records, and the content of the returned DNS records.

You can easily export the DNS queries information to csv/tab-delimited/xml/html file, or copy the DNS queries to the clipboard, and then paste them into Excel or other spreadsheet application.

Freeware

Whats new: >>

Fixed bug from version 1.71: DNSQuerySniffer crashed when selecting loopback interface or other network interfaces without connection information.

http://www.nirsoft.net/utils/dns_query_sniffer.html

[SiLæncer]

Wi-Fi Scanner locates visible wireless networks along with all corresponding information; including the network name (SSID), signal strength (RSSI) and quality, MAC address (BSSID), channel, maximum and achievable data rate, security, and much more.

Free for non-commercial use with simple registration.

Changelog

Added: In Windows 10 show available wi-fi networks window for password entering after connecting to wi-fi network.
Added: Connect to Wi-Fi network by double click on a network in wireless network list.
Added: French language
Updated: Number of network card vendors is increased to 25 296.
Fixed: Some small bugs are fixed.

[close]

http://lizardsystems.com/wi-fi-scanner/

[SiLæncer]

Manage the wireless network connections in your range, view valuable information, and connect to any preferred access point using this tool.

Freeware

Whats new:>>

Added new browser
Added improvements
Fixed bugs

https://cobratek.net/app_details?id=8

[SiLæncer]

NetworkLatencyView is a simple tool for Windows that listens to the TCP connections on your system and calculates the network latency (in milliseconds) for every new TCP connection detected on your system. For every IP address, NetworkLatencyView displays up to 10 network latency values, and their average. The latency value calculated by NetworkLatencyView is very similar to the result you get from pinging to the same IP address.
NetworkLatencyView also allows you to easily export the latency information to text/csv/tab-delimited/html/xml file, or copy the information to the clipboard and then paste it to Excel or other application.

Freeware

Whats new: >>

Fixed bug from version 1.60: NetworkLatencyView crashed when selecting network interface without connection information.

http://www.nirsoft.net/utils/network_latency_view.html