Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

WifiChannelMonitor captures wifi traffic on the channel you choose, using Microsoft Network Monitor capture driver in monitor mode, and displays extensive information about access points and the wifi clients connected to them. WifiChannelMonitor also allows you to view the information about wifi clients that are not connected to any access points, including the list of SSIDs (network names) that they are trying to connect.

For every access point, the following information is displayed: SSID, MAC Address, Device Manufacturer , PHY Type, Channel, RSSI, Security, Beacons Count, Probe Responses Count, Data Bytes, Retransmitted Data Bytes, and more...

For every client, the following information is displayed: MAC Address, Device Manufacturer, SSID list that the client tries to connect, Sent Data Bytes, Received Data Bytes, Probe Requests Count, and more...

License:    Freeware

Whats new:>>

Added 'WiFi Scanning Options' button to the 'Capture Options' window, which opens the 'WiFi Scanning Options' window of Microsoft Network Monitor.

http://www.nirsoft.net/utils/wifi_channel_monitor.html

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only;
dhcp - create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
dhcp - do not require lease and binding to have the same configuration for dual-stack queues;
dhcp - show warning in log if lease and binding dual-stack related parameters do not match and create separate queues;
dhcpv4-server - replaced "busy" lease status with "conflict" and "declined";
dhcpv6-client - fixed status update when leaving "bound" state;
dhcpv6-server - override prefix pool and/or DNS server settings by values received from RADIUS;
e-mail - include "message-id" identification field in e-mail header;
ike1 - fixed rekeying process when NAT is detected (introduced in v6.45beta16;
ospf - added support for link scope opaque LSAs (Type 9 for OSPFv2;
ospf - improved "unknown" LSA handling in OSPFv3;
supout - changed IPv6 pool section to output detailed print;
tr069-client - added LTE CQI and IMSI parameter support;
tr069-client - fixed potential memory corruption;
winbox - fixed crash when opening CAPsMAN menu (introduced in v6.45beta27;
wireless - fixed "country-info" printing (introduced in v6.45beta27;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Manage the wireless network connections in your range, view valuable information, and connect to any preferred access point using this tool.

Freeware

Whats new:>>

This release fixes issue with missing dynamic link library (DLL) file and improve the login security.

https://cobratek.net/apps/wifi-manager

[SiLæncer]

Whats new:>>

- Optimized scan feature
- Added minor changes
- Improved feedback feature
- Fixed bugs

https://cobratek.net/apps/wifi-manager

[SiLæncer]

WifiInfoView scans the wireless networks in your area and displays extensive information about them, including: Network Name (SSID), MAC Address, PHY Type (802.11g or 802.11n), RSSI, Signal Quality, Frequency, Channel Number, Maximum Speed, Company Name, Router Model and Router Name (Only for routers that provides this information), and more...

When you select a wireless network in the upper pane of this tool, the lower pane displays the Wi-Fi information elements received from this device, in hexadecimal format.

WifiInfoView also has a summary mode, which displays a summary of all detected wireless networks, grouped by channel number, company that manufactured the router, PHY type, or the maximum speed.

License: Freeware

What's new: >>

Added 'Restart Windows Wireless Service' option (Under the Help menu)

http://www.nirsoft.net/utils/wifi_information_view.html

[SiLæncer]

Advanced Port Scanner is a small, very fast, robust and easy-to-use Port Scanner. Powered with multithread scan technology, Advanced Port Scanner can scan hundreds of ports in just a few seconds! Also, it contains descriptions for common ports, and can perform scans on predefined port ranges.

Freeware

http://www.advanced-port-scanner.com/de/

[SiLæncer]

The application allows scanning Windows computers in a local network to extract information on applications installed on every PC. The reported information includes the application name, version and vendor, installation date and installation size, as well as other fields displayed in the Windows Programs and Components dialog.

Freeware

Changelog

New and improved features:

The program now supports early access version of .NET Framework 4.8 shipped with Windows 10 Insider Preview

Resolved issues:

The MSI products are not displayed in software inventory in case the installer uses lower case letters for creating uninstall keys
Possible failure during software inventory when specific software is faced

[close]

http://emcosoftware.com/network-software-scanner

[SiLæncer]

Changelog

certificate - fixed SAN being duplicated on status change (introduced in v6.44;
conntrack - fixed "loose-tcp-tracking" parameter not taken in action (introduced in v6.44;
dhcpv4-server - fixed commenting option for alerts;
dhcpv6-server - fixed binding setting update from RADIUS;
ike1 - improved stability for transport mode policies on initiator side;
ipsec - fixed freshly created identity not taken in action (introduced in v6.44;
ipsec - fixed possible configuration corruption after import (introduced in v6.44;
ipv6 - adjusted IPv6 route cache max size;
ipv6 - improved IPv6 neighbor table updating process;
lte - reset LTE modem only when SIM slot is changed on dual SIM slot devices;
rb2011 - removed "sfp-led" from "System/LEDs" menu;
smb - fixed possible buffer overflow;
snmp - added "radio-name" (mtxrWlRtabRadioName OID support;
ssh - added "both", "local" and "remote" options for "forwarding-enabled" parameter;
ssh - do not generate host key on configuration export;
ssh - fixed multiline non-interactive command execution;
switch - fixed possible crash when interface state changes and DHCP Snooping is enabled;
userman - updated authorize.net gateway DNS name;
wireless - added support for US FCC UNII-2 and Canada country profiles for LHG-5HPnD-US, RBLHG-5HPnD-XL-US and SXTsq5HPnD-US devices;
wireless - improved wireless country settings for EU countries;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

A HTTP tunneling solution that allows advanced users to manipulate requests and responses in such a way that they bypass proxy and firewall restrictions.

Freeware

https://sourceforge.net/projects/tcp-over-http-tunnel/

[SiLæncer]

Changelog

dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap) as initiator (CLI only);

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

Improvements

    Improved CPU usage that could grow over time when closing / re-opening target windows and summary windows.
    Improved user experience when attempting to configure as a CloudConnect Agent / Controller with an existing configuration.
    Improved behavior of CloudConnect syncing data, no longer displays when configuring as a newly created Controller.
    When an error occurs during a target list import via CloudConnect Agent should now result in a single message window rather than a new window for each incident.
    Improved CloudConnect splash behavior which could have resulted in having multiple windows open displaying different status's.
    Significantly improved memory usage when attempting to send email alerts but unable due to no connection.
    Improved some buggy behavior which could occur when attempting to reset and restart CloudConnect traces.

Fixes

    Installing as a service for the first time should now properly copy application data if no service data exists.
    Resolved a scenario where a corrupt data file would fail to rebuild and prevent startup.
    CloudConnect trace utilization messaging now properly updates when CloudConnect traces are closed.
    When a CloudConnect trace fails to resolve it's address, no longer displays intrusive message with options to Manage Traces and View Account.
    When enabling as a CloudConnect Controller / Agent, now closes settings window which could result in over-writing new settings if clicking "Save" on lingering open windows.

[close]

http://www.pingman.com/

[SiLæncer]

Monitor the download and upload speed of one or multiple network adapters from a simple desktop gauge, with this open-source program.

MIT License

Whats new:>>

Data usage counters.
Data usage warning.
Data usage renewal.
Bug fixes.

https://github.com/oormicreations/VizNetGauge

[SiLæncer]

Terminal Services Manager shows which user is connected to the remote host, what processes they are running, and how much of the server resources (CPU and memory) they are using. You can send users messages, disconnect them from the server, or connect to their sessions remotely. With Terminal Services Manager you can send bulk messages to users, disconnect idle users, and end sessions of multiple disconnected users simultaneously. Terminal Services Manager allows you to work with several hosts at once.

Terminal Services Manager displays information in both table form and by drawing graphs of the usage of CPU, memory, and other resources over time for each server, session, and user.

Freeware (If after the 30-day period you would like to continue to use it, you must register the software.)

Whats new:>>

Added: quick filter computer list
Added: French language

http://lizardsystems.com/terminal-services-manager/

[SiLæncer]

Slitheris Network Scanner is an advanced scanner that will quickly provide you with comprehensive information about your network, and so much more. This scanner goes above and beyond most by really digging deep for information and providing it quickly. It is capable of scanning a multitude of devices in a flash, and gives you more than just the run of the mill MAC Address but goes as far as detecting and identifying your OS and device type in addition to using proprietary TCP/UDP OS fingerprinting to detect operating systems like iOS and Android, and Windows, with over 80% accuracy.

Slitheris Network Scanner accurately finds pingable devices via standard multi-threaded ping sweeps as well as detecting unpingable hidden devices using ARP pings and various other advanced discovery technology. It is even equipped to detect true case-sensitive PC names for Windows computers and servers.

 Freemium

http://www.komodolabs.com/

[SiLæncer]

CurrPorts displays the list of all currently opened networking ports on your local computer. For each TCP/IP and UDP port in the list, information about the process that opened the port is displayed, including the process name, full path of the process, version information of the process (product name, file description, and so on), the time that the process was created, and the user that created it.

In addition, CurrPorts allows you to close unwanted TCP connections, kill the process that opened the ports, and save the TCP/UDP ports information to HTML file , XML file, or to tab-delimited text file. The program will automatically mark with pink suspicious ports owned by unidentified applications (applications without version information and icons).

A 64-bit version is available.

License: Freeware

What's new: >>

Added /CaptureTime command-line option, which allows you to capture ports information from command-line for the specified number of milliseconds, instead of taking a single snapshot.
For example: cports.exe /scomma c:\temp\ports1.csv /CaptureTime 10000
Be aware that you must run cports.exe as administrator in order to get the Sent/Receive bytes information with the /CaptureTime command-line option.
Added /RunAsAdmin command-line option, for running CurrPorts as administrator from command-line.

http://www.nirsoft.net/utils/cports.html