Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Support IPv6 safe-search forwarding by RespCache.
    Use cloned message on RespCache.
    NxClient policy disabled bug fixed.
    Jahaslist has been updated to 2392825.

[close]

http://www.nxfilter.org/

[SiLæncer]

WhoIsConnectedSniffer is a network discovery tool that listens to network packets on your network adapter using a capture driver (WinpCap or MS network monitor) and accumulates a list of computer and devices currently connected to your network. WhoIsConnectedSniffer uses various protocols to detect the computers connected to your network, including ARP, UDP, DHCP, mDNS, and BROWSER.
For every detected computer or device, the following information is displayed: (Some of the fields might be empty if the information cannot be found inside the packets) IP Address, MAC Address, name of the device/computer, description, Operating System, Network Adapter Company, IPv6 Address.

After collecting the connected computers/devices information, you can easily export the list to tab-delimited/comma-delimited/xml/html file.

Freeware

Whats new: >>

The information of the selected network adapter is now displayed in the window title.

http://www.nirsoft.net/utils/who_is_connected_sniffer.html

[SiLæncer]

Mac Makeup is a freeware program that allows you to spoof your MAC address.

To spoof your MAC address, you need to:
1. Select your network interface
2. Type the new MAC address into the box
3. Click "Spoof"

Done! You need to disable and enable the interface again.

If the MAC address is already spoofed on an interface, you can use the "Reset to original" button to go back to your original one.

Freeware

https://www.gorlani.com/software/mmkup.php

[SiLæncer]

A user-friendly and efficient application that can scan your computer for network adapters and analyze the connections in your LAN.

Freeware

https://homepage.univie.ac.at/devag8/

[SiLæncer]

Whats new:>>

added command line switches to automate spoofing

https://www.gorlani.com/software/mmkup.php

[SiLæncer]

WhoisThisDomain is a domain registration lookup utility allows you to easily get information about a registered domain. It automatically connect to the right WHOIS server, according to the top-level domain name, and retrieve the WHOIS record of the domain. It support both generic domains and country code domains.

License: Freeware

What's new: >>

Fixed bug: WhoisThisDomain failed to remember the last size/position of the main window if it was not located in the primary monitor.

http://www.nirsoft.net/utils/whois_this_domain.html

[SiLæncer]

Umfangreiches Monitoring-Tool zum Überwachen eigener Netzwerk-Server und -Geräte sowie anderer IT-Ressourcen mit zahlreichen Visualisierungsmöglichkeiten; versendet in Notfällen E-Mails, Kurznachrichten via SMS oder Sofortnachrichten via Instant Messenger; zeigt alle Informationen im Browser-Fenster an; auch als Plug-in für Firefox erhältlich.

License: GPL

Changelog

    ZBX-14414
    fixed PHP 7.2 error message in the Monitoring->Latest data page
    ZBX-13712
    fixed "Undefined index: master_itemid" and SQL errors in item.update and itemprototypr.update methods; fixed updating of discovered items
    ZBX-13549
    fixed displaying of not monitored triggers in maps
    ZBX-12359
    fixed "Automatic icon selection" checkbox not working and displaying two icons at once in map constructor
    ZBX-14333
    fixed {ESC.HISTORY} and action log not to display colon without target host when executed on Zabbix server
    ZBX-13361
    fixed error messages when configuring an existing item to have an update interval
    ZBX-13043
    removed error message for when user has defined media but all of them are disabled
    ZBX-14312
    fixed possible deadlock in history syncer when housekeeper is deleting events
    ZBX-13697
    fixed session expiration when changing default authentication method
    ZBX-13680
    fixed action not being cloned due to existing operation id being submitted
    ZBX-13775
    fixed map tree widget border color
    ZBX-13782
    fixed decoding of Unicode characters in JSON
    ZBX-13767
    fixed "undefined index: acknowledges" error on problems page
    ZBX-12175
    fixed subfilter entries with long names going off the screen
    ZBX-12644
    fixed filter being partially reset when using pagination in availability report page
    ZBX-12882
    fixed in popup window being allowed to select applications from different hosts when editing item mass update form
    ZBX-13788
    fixed host availability stuck in unknown state after proxy changes
    ZBX-12372
    fixed duplication of prefix "/" for second parameter "path" in items "web.page.*"
    ZBX-14315
    fixed validation of "max_depth" in "vfs.dir.size" for agent

[close]

http://www.zabbix.com/

[SiLæncer]

Changelog

    cloud - added command "/system backup cloud" for backup storing on cloud (CLI only;
    bridge - improved packet handling when hardware offloading is being disabled;
    cloud - ignore "force-update" command if DDNS is disabled;
    crs3xx - fixed possible memory leak when disabling bridge interface;
    defconf - properly clear global variables when generating default configuration after RouterOS upgrade;
    discovery - properly use Sytem ID for "software-id" value on CHR;
    e-mail - added info log message when e-mail is sent successfully;
    lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
    proxy - removed port list size limit;
    romon - improved reliability when processing RoMON packets on CHR;
    routerboard - show "boot-os" option only on devices that have such feature;
    switch - fixed port mirroring on devices that do not support CPU Flow Control;
    webfig - allow to change user name when creating a new system user;
    webfig - fixed time interval settings not applied properly under "IP/Kid Control/Kids" menu;
    winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
    winbox - added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
    winbox - added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
    winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
    winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
    winbox - fixed corrupt user database after specifying allowed address range (introduced in v6.43;
    winbox - make bridge port "untrusted" by default when creating new port;
    winbox - show "IP/Cloud" menu on CHR;
    winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Find all active devices on your network. Discover the ip address and available services for each network device. Run a speed test to check your internet connection speed.

PortScan shows all open ports and additional information like host name, MAC address, HTTP, SMB, FTP, iSCSI, SMTP and SNMP services. Up to 100 threads are used for scaning large ip address ranges.

Search Devices
You can search for UPnP enabled devices, Bonjour services, Netgear router, Samsung printer and Freecom network devices. So you can find them even if you don't know the ip address.

Ping Devices
Ping any computer with 3 standard sized ping packets, with 3 different sizes, each 10 times or ping the computer continuously.

Speed Test
Test your internet connection speed by downloading and uploading data to various servers. Also a latency test and a open port test is included.

Freeware

Whats new:>>

Remember scan start and end address

http://www.the-sz.com/products/portscan/

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Whats new:>>

Fix for frozen interface errors when running as a service in the background
Improvements to handling of incompatible sessions data files

http://www.pingman.com/

[SiLæncer]

Changelog

    routerboot - fixed RouterOS booting on devices with particular NAND memory (introduced in v6.43);

New in The Dude 6.43.1

    crs317 - fixed packet forwarding on bonded interfaces without hardware offloading;
    defconf - properly clear global variables when generating default configuration after RouterOS upgrade;
    dhcpv6-client - log only failed pool additions;
    hotspot - properly update dynamic "walled-garden" entries when changing "dst-host";
    ike2 - fixed rare authentication and encryption key mismatches after rekey with PFS enabled;
    lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
    rb3011 - added IPsec hardware acceleration support;
    routerboard - fixed memory tester reporting false errors on IPQ4018 devices ("/system routerboard upgrade" required);
    sniffer - made "connection", "host", "packet" and "protocol" sections read-only;
    switch - fixed port mirroring on devices that do not support CPU Flow Control;
    upnp - improved UPnP service stability when handling HTTP requests;
    webfig - allow to change user name when creating a new system user (introduced in v6.43);
    webfig - fixed time interval settings not applied properly under "IP/Kid Control/Kids" menu;
    winbox - added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
    winbox - added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
    winbox - fixed corrupt user database after specifying allowed address range (introduced in v6.43);
    winbox - make bridge port "untrusted" by default when creating new port;
    winbox - show "IP/Cloud" menu on CHR;
    winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
    wireless - removed "czech republic 5.8" regulatory domain information as it overlaps with "ETSI 5.7-5.8";

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Mit Simple IP Config können die Angaben für die vorhandenen Netzwerkadapter geändert werden (IP, Subnet-Maske,Gateway, DHCP, DNS).
Diese Werte lassen sich als Profile speichern, so das man später nur noch das passende Profil laden muss.

License:    GNU GPLv3

Changelog

BUG FIXES:

#71 COM error when no internet connection.

[close]

https://github.com/KurtisLiggett/Simple-IP-Config

[SiLæncer]

NetBIOS-, SNMP- und TCP/IP-Scanner; überprüft unter anderem die Erreichbarkeit von Host-Rechnern und zeigt die verschiedenen Typen von Dateien an, die im Netzwerk ausgetauscht werden; unterstützt Wake On LAN und das ferngesteuerte Herunterfahren von Rechnern im Netzwerk

Whats new:>>

Added Remote JSON feature for retrieving and parsing JSON responses from network devices.
Added access to Redfish Scalable Platforms Management built on top of Remote JSON.
Added Portuguese (Brazil) as a supported UI language.

http://www.softperfect.com/products/networkscanner/

[SiLæncer]

Multi Threaded TCP Port Scanner is a TCP Port scanner Multi threaded with possibility to scan 65535 TCP ports on an IP address. You can specify how many threads to run and the timeout. Further more it will tell you the MAC address of the target and the service running.

Freeware

https://sourceforge.net/projects/syn-portscan/

[SiLæncer]

cStatus is an advanced portable network scanning and monitoring tool, notably including a Traceroute function with the rare capability (under Windows) to return AS# (Autonomous System) number and network name for each hop traversed.

Freeware

Whats new:>>

[fix] Fixed a bug where autosave did not record the last period of a day
[fix] Fixed sorting bug when duplicate column values were present
[new] New button in the chart form that allows you to view recorded chart files without having to load them
[new] Trace route tool remembers up to last 20 traces
[alt] Improved chart form layout

https://www.hnsoft.pt/cstatus