Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

*) backup - do not encrypt backup file unless password is provided;
*) bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
*) bridge - added initial Q-in-Q support (CLI only);
*) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
*) crs3xx - fixed VLAN filtering when there is no tagged interface specified;
*) lte - added ICCID reading for info command R11e-LTE (CLI only);
*) lte - added roaming status reading for info command (CLI only);
*) lte - improved r11e-LTE configuration exchange process;
*) lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
*) lte - use alphanumeric operator format in info command;
*) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
*) radius - use MS-CHAPv2 for "login" service authentication;
*) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
*) smb - fixed valid request handling when additional options are used;
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
*) w60g - added 4th 802.11ad channel (CLI only);
*) w60g - general stability and performance improvements;
*) w60g - improved maximal achievable distance;
*) w60g - removed distance lock for wAP 60G devices;
*) webfig - improved authentication process;
*) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
*) wireless - fixed wireless interface lockup after period of inactivity;
*) wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates;
*) wireless - improved client "channel-width" detection;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Scan for network interfaces and adapters installed on your system and monitor the incoming and outgoing network traffic with this application.

Freeware

Whats new:>>

Graph bug fix.

http://www.mitec.cz/netmet.html

[SiLæncer]

Changelog

New features

French a Spanish translations
Added Language debug option for the translators.
Now, it’s not possible to set Block as a default firewall action. Which prevents possible misunderstandings.

Bug fixes

Timeout exception while calling NetLimiter service.
Missing scrollbar in custom filter in Stats.
Black menu font color in dark themes.
Possibility to set ‘Block’ by mistake as a Default firewall action.
Other small improvements.

[close]

http://www.netlimiter.com/

[SiLæncer]

InSSIDer: Zeigt für in der Umgebung verfügbare WLANs Informationen wie SSID, MAC-Adresse, Kanal, Verschlüsselung oder Signalstärke an, und bietet GPS-Support.

Changelog

Now GDPR compliant 🙂 MetaGeek, along with every other tech company that you do business with has been busy updating privacy policies, data retention policies, and other processes related to the European Union’s new General Data Protection Regulation. This update provides links to our privacy policy when we ask for personal information and anonymous usage data. As always we treat your personal information with respect, no matter what country you live in.
Fixed the Vendor Vendor bug

[close]

http://www.metageek.net/products/inssider

[SiLæncer]

Whats new:>>

*) lte - fixed automatic LTE band selection for R11e-LTE;
*) wireless - improved client "channel-width" detection;
*) wireless - improved Nv2 PtMP performance;
*) wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates;

http://www.mikrotik.com/thedude.php

[SiLæncer]

Changelog

*) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
*) bridge - fixed FastPath for bridge master interfaces (introduce in v6.42);
*) chr - fixed adding MSTI entries;
*) dhcpv6-client - added missing "Server identifier" parameter in release message;
*) kidcontrol - fixed dynamically created firewall rules order;
*) lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
*) lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
*) w60g - added distance measurement (CLI only);

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

- DNS over HTTPS support added.
- ClassifierRulset.incModCnt added.
- 'No system categories' option has been removed.
- v4.2.6 of 'domain-pattern.txt' applied.
- NxClassifier ruleset updated to 433.
- Jahaslist has been updated to 2179277.
- p1, Wildcard redirection added.
- p1, Bypass caching when there's no ARecord for an A type query.
- p1, JahaslistDic cache size increased to 300000.

[close]

http://www.nxfilter.org/

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freeware

Whats new:>>

Changed: Submitting an email address is now required to unlock a trial installation of Lansweeper

http://www.lansweeper.com/

[SiLæncer]

It is a free multi-threaded ICMP, Port, IP, NetBIOS, ActiveDirectory and SNMP scanner with many advanced features. It is intended for both system administrators and general users who are interested in computer security. The program performs ping sweep, scans for opened TCP and UDP ports, resource shares and services.

For devices with SNMP capability available interfaces are detected and basic properties displayed. In addition you have to edit results, save/load results to/from CSV and print network device list and any data in any section can be exported to CSV. It can also resolve host names and auto-detect your local IP range.

Whats new:>>

UI fixes.

http://mitec.cz/netscan.html

[SiLæncer]

Changelog

dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - fixed DHCP server stuck in invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
lte - do not allow to remove default APN profile;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added distance measurement (CLI only);
winbox - by default specify keepalive timeout value for tunnel type interfaces;
winbox - show "System/Health" only on boards that have health monitoring;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface (CLI only);
bridge - added initial Q-in-Q support (CLI only);
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
capsman - allow to change "radio-name" (CLI only);
certificate - add "expires-after" parameter (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed adding MSTI entries;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu (CLI only);
kidcontrol - allow to edit discovered devices;
kidcontrol - fixed dynamically created firewall rules order;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
w60g - added 4th 802.11ad channel (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed bridge port MAC learning parameter values;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetWorx is a simple, yet powerful tool that helps you objectively evaluate your bandwidth situation. You can use it to collect bandwidth usage data and measure the speed of your Internet or any other network connection. NetWorx can help you identify possible sources of network problems, ensure that you do not exceed the bandwidth limits specified by your ISP, or track down suspicious network activity characteristic of Trojan horses and hacker attacks.

Whats new:>>

All graphics and icons are now vector images and scale to any DPI on high-resolution displays.
Added system tray notifications for connection monitor detections.
Improved and uniformed menus for single and double-click actions.
Updated and Microsoft-signed LAN traffic filtering drivers.

http://www.softperfect.com/products/networx/

[SiLæncer]

Manage the wireless network connections in your range, view valuable information, and connect to any preferred access point using this tool.

Freeware

Whats new:>>

Improved UI
Fixed bugs
Added crash handler feature
Added improvements

https://cobratek.net/app_details?id=8

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

Ask for global variables when project is loaded
Add/Edit global variables of project
Rename tabs at Edit Project
Global variables tab on Edit project
Support of supplier logo and url
Add missing crowdfunder name in About dialog.
Project variables and supplier
No timeout when duplicating a project.
No timeout when restoring snapshot.
Add advanced settings for docker and ExtraHosts param, Ref. #2482
Replace "not supported" by "none" in topology summary view.

[close]

https://www.gns3.com/software

[SiLæncer]

Axence nVision Free is the lite version of Axence nVision Pro with mapping and monitoring of unlimited devices and basic features including user monitoring, inventory taking, helpdesk, and device access control.

You can use it as a network discovery tool for scanning, discovering connected systems and devices, and it also will list their TCP/IP services. You can then create network maps for a visual aid. But that is not all, Axence nVision Free will also monitor your system in the event that a host is down, or a service has failed, it can also let you know if CPU utilization is high and can notify you via email or desktop alert if a new system has connected to the network keeping you fully apprised of all aspects of your network.

This free version does include:

Network discovery and visualization
nVision Server: network scanning, detection of devices and TCP/IP services, web access with browser
Network monitoring
Unlimited number of monitored devices
TCP/IP services: response time and correctness, packets received/lost statistics (PING, SMB, HTTP, POP3, SNMP, IMAP, SQL, etc.)
WMI counters: CPU load, memory usage, disk usage, network traffic, etc.
SNMP v1/2/3 counters: network traffic, temperature, humidity, power supply voltage, toner level, etc.
File distribution with use of WMI
MIB file compiler
Alerts and reports
Event/action alarms for network monitoring and SNMP and WMI counters
Notifications (on desktop, by e-mail, by SMS) and repair actions (program launch, computer restart, etc.)
Reports (for user, device, branch, network maps or entire atlas)
Hardware and software inventory
List of applications and Windows updates on single workstation (registry)
Software serial numbers (keys)
Overview of workstation hardware
System info (startup commands, user accounts, shared folders, SMART details, etc.)
User activity monitoring
User activity overview
Top 10 of visited web pages
And much more.

[close]

Free for up to 10 devices

https://axence.net/en/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

Api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
Backup - do not encrypt backup file unless password is provided;
Btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
Cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
Mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
Radius - use MS-CHAPv2 for "login" service authentication;
Romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
Webfig - improved authentication process;
Winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
Backup - generate proper file name when router identity is longer than 32 symbols;
Bridge - added ingress filtering options to bridge interface;
Bridge - added initial Q-in-Q support;
Capsman - increase timeout for the CAP to CAPsMAN communication;
Certificate - added "expires-after" parameter;
Certificate - fixed "add-scep" template existence check when signing certificate;
Chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
Chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
Chr - fixed interface name assign process when running CHR on Hyper-V;
Chr - fixed MTU changing process when running CHR on Hyper-V;
Chr - fixed various network hang scenarios when running CHR on Hyper-V;
Chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
Console - fixed script permissions if script is executed by other RouterOS service;
Dhcpv6-server - added initial dynamic simple queue support;
Ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
Ipsec - separate phase1 proposal configuration from peer menu;
Lte - improved modem event processing;
Ppp - fixed "hunged up" grammar to "hung up" within PPP log messages;
Ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
Quickset - added missing wireless "channel-width" settings;
Quickset - added support for "5ghz-a/n" band when CPE mode is used;
Quickset - recognize 160 MHz channel as HomeAP mode;
Romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
Supout - added "partitions" section to supout file;
Switch - added support for port isolation by switch chip;
Webfig - properly display time interval within Kid Control menu;
Webfig - properly show NTP clients "last-adjustment" value;
Winbox - added "poe-fault" LED trigger;
Winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
Winbox - added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
Winbox - allow to specify full URL in SCEP certificate signing process;
Winbox - fixed arrow key handling within table filter fields;
Winbox - properly close session when uploading multiple files to the router at the same time;
Winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
Winbox - show "scep-url" for certificates;
Winbox - show "System/Health" only on boards that have health monitoring;
Winbox - show firmware upgrade message at the bottom of "System/RouterBOARD" menu;

[close]

http://www.mikrotik.com/thedude.php